How to install air fragrance system for Mercedes-Benz W205 C class /W253GLC class

Mercedes-Benz W205 C class /W253GLC class air fragrance system installation instruction

 TOOLS need to be ready 

 Air fragrance product content

1 Remove glove box and put it in a flat workbench

 2Remove the fixed rod on both side of glove box 

3 Remove the Damper plastic block buttons

 4 Total 2pcs long and  1 pcs short

 5Separate the glove box

 6 Put the positioning metal on the inner side of glove box .and fix it .

 7 Cut the plastic follow the inner edge of metal,be careful don’t damage other place

 8 Effect picture after cutting show as below

 9 Position the screw metal with electronic drill , and keep the metal there

 10 Keep the screw metal  on position place

 11 Remove the outer plastic reserve hole of glove box

 12 Air fragrance effect picture after screwing the screw

 13 Run out the power cable and perfume tube

 14 Installation completely effect picture show as 1~2

 15 Power cables connected

BATT red：connect original fuse box .

GND brown: Connect GND

Box Check Blue: connect the gray cable of glove box light.

LIN green: connect PIN13 of glove box plug. Which color is purple and green .

LIN green: The plug of original glove box,PIN13.

 BOX CHECK Blue：Connect the gray cable of glove box light

 16 A air fragrance hole is reserved under the center speaker, run the perfume tube to this hole and reset the glove box . installation done.then enter the program progress.

17 Video show  how to install the air fragrance system and how to program it .

Any question about installation or using ,welcome contact us:

Skype:chalin.abc

Whatsapp:+86 15220061978

How to install 3D rotation Burmester tweeter for Mercedes-Benz

Installation for 3D rotation Burmester tweeter for Mercedes-Benz 

First let's see a video about the Burmester tweeter for Mercedes-Benz first .

B

1 Take off the front door panel , Find the control box , take out the #6 （blue cable) and conect to ours(Green cable)

 2 Connect the car speaker white color plug with ours (white color)

 3 Connect orginal horn wire to the blue cable of our speaker.and plug with factory horn with another end of blue cable.

              Then test the tweeter , reset the door panel . installation done.

Effection picture

Mercedes-Benz 360 degree surround view system (Panoramic Astern) for W213 E class

Mercedes-Benz 360 degree surround view system ,also call Panoramic Astern. first let us know brifely about panoramic astern  let's know more about this product by

W213 E class 360 degree surrounding view

Rear view camera 

Front view camera

Left side camera

Right side camera
All these Front ,Rear, Left.Right view funciton can be see eparately ,and its controled by Original Rotary knob 

And keep factory car Radar function 

As pitures show above, Feature：

1  HD single ,not CVBS.

2  Parking guide line display on monitor when put R gear or D gear.

3  Keep original rador function

How about installation? need to drill a hole for side camera ? no need,cause the camera module is made in 1:1 scale with original ,all plug and play ,no need drill hole .

One very important things is :After upgrade 360 degree panaramic astern , factory wide-angle rear view function was reserved

At the same time ,its Built in 4 channels DVR,You can press “P”key enter 360°system. use Rotory knob to control DVR 

So how to install the system ?

Feel difficult? don't worry , here have video show Mercedes-Benz 360 degree surround view system calibration 

Kindly note: Its a professional job to install 360 camera , please Dont DIY if you are not very experience on car modificaion .