How to install air fragrance system for Mercedes-Benz W205 C class /W253GLC class

Mercedes-Benz W205 C class /W253GLC class air fragrance system installation instruction

 TOOLS need to be ready 

 Air fragrance product content

1 Remove glove box and put it in a flat workbench

 2Remove the fixed rod on both side of glove box 

3 Remove the Damper plastic block buttons

 4 Total 2pcs long and  1 pcs short

 5Separate the glove box

 6 Put the positioning metal on the inner side of glove box .and fix it .

 7 Cut the plastic follow the inner edge of metal,be careful don’t damage other place

 8 Effect picture after cutting show as below

 9 Position the screw metal with electronic drill , and keep the metal there

 10 Keep the screw metal  on position place

 11 Remove the outer plastic reserve hole of glove box

 12 Air fragrance effect picture after screwing the screw

 13 Run out the power cable and perfume tube

 14 Installation completely effect picture show as 1~2

 15 Power cables connected

BATT red：connect original fuse box .

GND brown: Connect GND

Box Check Blue: connect the gray cable of glove box light.

LIN green: connect PIN13 of glove box plug. Which color is purple and green .

LIN green: The plug of original glove box,PIN13.

 BOX CHECK Blue：Connect the gray cable of glove box light

 16 A air fragrance hole is reserved under the center speaker, run the perfume tube to this hole and reset the glove box . installation done.then enter the program progress.

17 Video show  how to install the air fragrance system and how to program it .

Any question about installation or using ,welcome contact us:

Skype:chalin.abc

Whatsapp:+86 15220061978