12 colors ambient lighting for Mercedes Benz GLA /CLA /A/ B/ AMG class

BMW DISPLAY KEY FUNCTION DEMO

Nano coating waterproof anti fog film for car rear mirror

How to install and coding BMW logic 7 MOST amplifier

 BMW logic 7 MOST Amplifier installation and Coding 

How to install carplay for Mercedes-Benz NTG5.0 /NTG5.0+ W205 C X253 GLCs W177 A X156 GLA class

Installation for Mercedes-Benz carplay module 

Support 2015-2017 NTG5.0 /NTG5.0+

W205 C class        X253 GLC class

W177 A class        X156 GLA class

Feature: 

Use original microphone

Original car radar and backup camera display

Support 360 panaramic astern 

Plug and play , no need remove the screen

Tel/whatsapp/wechat :+8615220061978

How to install the roof speaker for Mercedes-benz W205 C class

How to install the roof speaker for Mercedes-benz W205 C class

CANBUS CABLE CONNECT

How to disassemble seat adjustment for BMW

Disassemble Seat Adjustment for BMW

1Prepare goods

2Release the screw behind the original seat adjustment kit

3Take off the plastic cover and the green PCB board

4Take off the original parts .

 5Get the Button slider 

6Install the original parts to our kits. First is button slider

 second the adjuster

third the components 

then our 4 pcs buckle 

 Final the Green PCB.recover with fix it with screw

 7Effect picture

How to install lumbar support for BMW ?

How to install lumbar support for BMW 

1 Release the two buckle and remove seat back side panel .

2 Move upwards to remove the the panel.

3 Be careful that ambient light lamp behind the panel. Take off the lamp adaptor. 

4 Remove the seat plastic adjustment part.

5 Install our plasma lumbar kits to the original adjustment part. 

6 Switch power cable to control box which under the seat.

7 Run the power cable of control box to back side of seat.please follow original harness .

8 Run the CAN cable to power cables position and connect it follow below PIN definition diagram 

 9 install the adjustment parts which with our kits and connect it to original plug .

10  Install the air bag to the back of seat

11 PLug and play the harness

12Fix the motor and control box ,Recover original car seat 

How to install the folding mirror for Land Rover ?

Instrution for Installing the Land Rover folding mirror 1 Prepare tools

2 Withdraw door panel trim 

 

3 Withdraw total 5 pcs screws on the door panel

 

4Take off door panel,the key cables ,then take off the plug 

 

5 Take off rear mirror assembly 

 

6Take off  the mirror regulator with T10 tool 

 

 7Withdraw the mirror regulator basic mount and all the screw

 8Take off  the rear mirror cover 

 9Take off the screw after withdrawing the rear mirror cover.

 10Upward the buckle after separating the frame and rear mirroring cover 

11Separation effect diagram

12Follow the arrow direction to open up the iron tube with tool, devide the plastic part and basic mount.

 

13Effect picture after installing the folding plastic part.

 

14Recver the rear mirror, connect the motor male and female plug 

 

15Picture show driver door panel ,the White LIN cable(#16) connect to original car door panel #16 plug which under the subwoofer 

 

16Take off the harness box which local in driver door side

 

17Run the motor cable (white ,green,blue.) to the harness box 

 

18 3 pcs female plug connect to original car module ,make sure its connected with corresponded Male Number 

 

 19 Be attention that no cables outside and no cables was under pressed

20 Withdraw total 3 pcs screws

 

21Take out the lamp.

22 Take off the engine cover switch screw

 

23 Take out the plastic cover 

 

24 Take off the original car module and take out the cover

 

25 Take out the blue color plastic cover

 

26 OBD module’s male terminal must be connect as above picture showed.(connect the Corresponding color

 

27 Take out original car OBD module with screw .

 

28 Switch original car OBD to our OBD

 

29 Plug to module, make sure it connect well .

 

30 Module install under the cushion of left side .

 

 31 Devide two copilot door cables , connect the 

32 PIN definition diagram

 

 

For 2016 version OBD :

Module #1---OBD#16(12V)

Module #2---OBD#3(CAN/H)

Module #3---OBD#11(CAN/L)

Module #10---OBD#4(GND)

Module #12--Spread power out (12V)

Module #14--Folding power out (12V)

Module #8--Door Plug assembly #16

For 2017 version OBD :

Module #1---OBD#16(12V)

Module #2---OBD#1(CAN/H)

Module #3---OBD#9(CAN/L)

Module #10---OBD#4(GND)

Module #12--Spread power out (12V)

Module #14--Folding power out (12V)

Module #8--Door Plug assembly #16

WWW.CARTUNINGSTATION.COM