2017年10月30日星期一

How to install Ambient light for Mercedes-Benz W205 C class /W253 GLC class

First ,let's share some Effection picture about Mercedes-Benz ambient light/ interior atmosphere lighting

Here come to the point, how to get this ambient light function for your car?

First . we need to knwo what the  product component are?

Centrol sonsole parts

Four doors parts

Lamp for centrol console

Lamp for front door 

Lamp for rear door 


Extention cable for rear door

Second step :Take off the door panel

1、Take off the panel after release the screw with T30 tool

2、Take off the wooden peach part after releasing the METEL buckle


3、 Use a pliers or soldering iron cut below the black solder joint to withdraw
the electroplating trim


4、Replace our electroplanting trim ,install the peach panel and fix it with
adhesive or electric iron.


5 Connect the Lamp and replace the original car door handle lamp(package it ,no need anymore)


 6  Run the cable and connect the NO6 plug, white cable connect 5#,Brown connect
10#,Orange connect 11#.then install the panel to car



Note: Above show for front door , some car version need run extention cable to
reardoor , casue original without reserved cable, Just check if there is any
reserved pin in the 5#,10#,11# of plug NO6 .

5# ,10#, 11# without pin
reserved,need run cable

5# ,10#, 11# with pin reserved, no
need run cable ,same install method as
front door




8.Cables run from rear Left side pillow B to right side pillow B
,diagram show as above

9 Diagram for connecting cable
                        Pull uptowords

                Push downtowords
                                                                                         WHITE BOLT must pull out
                   Orange 18# White16#

                                                                                           Orange27#White28#
         Rear door brown ground cable connect to brown ground cable oforiginal door handle
     Rear door brown ground cable connect o brown ground cable of original door
handle


Third Step:Centrol console installation

1 Install the centrol console lamp to the reversed position.make sure that lamp installed is fixed

 2  plug the lamp with two end ,replace the cup holder lamp and glove box lamp ,total 6 pcs


 3 Take off the plate under steering wheel,run the cable from centrol console
to left side BLUE plug .Orange connect1#,white connect13#,Brown connect
Ground. then reset.

                                               后门--Means Rear door ;中控---Means centrol console
                                                                                                 Orange 1# White 13#

 Forth STEP: PROGRAMMING

Use our plug and play OBD to upgrade .
1 Turn on the car engine
2 Plug the OBD tool
3 Wait the car menu shows"DIAGNOSTIC"
4 Locked the car for 2 minutes after the vehicle automatic restart from diagnostic status.
5 Go to vehicle setting menu to check if the Ambient light menu was activated.
Here is the video demo to show
how to activate the ambient light:
Or how to install the ambient light
Welcome subscribe my YOUTUBE :


 Here we already accomplish the installation Ambient light for Mercedes-Benz W205 C class/W253 GLE class

Article made by Chalin
skype:chalin.abc

4 条评论:

  1. I am interested in a ambient lighting kit for a mercedes 2016 c300 w205. Do you have any kits that you are selling?

    回复删除
  2. Hello how much is coast?
    Thanks

    回复删除


  3. I am interested in a ambient lighting for mercedes 2014 C220 w205. how much is cosast thanks

    回复删除
  4. Hi, how are you? I contact you here because I am interested in mounting the ambient lights that you explain in that tutorial and I would like you to explain the connections better. I do not see it clearly in the photos. Could you send me the instructions more clearly?
    Where to connect the center console and the front doors? Later I would like to know the rear.
    Greetings I hope your help thank you very much.
    My email is pjcgsa@hotmail.com.

    回复删除